High-Voltage Outdoor Disconnector with Customizable Isolator Switch Features

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

Introducing the exceptional (H)GWBEB type outdoor high-voltage isolation switch, commonly revered as an isolation disconnect switch. Engineered for deployment in the demanding arenas of 10(12, 15, 24)kV high voltage power transmission and distribution lines, this switch elegantly manages the opening and closing of single-phase or three-phase circuits. It operates seamlessly without load, even when voltage is present, ensuring reliable performance in every scenario.

This switch is a marvel of simplicity and functionality, tailored for single-phase applications within three-phase line systems. It boasts a straightforward structure, unrivaled cost-effectiveness, and intuitive usability. The switch supports an array of rated currents, comprising 200, 400, 600, 800, 1000, and 1250 amps. Its design encompasses a robust base, sturdy post insulators, high-quality conductive parts, and an efficient mechanical section. A sophisticated gate knife assembly facilitates the opening and closing mechanisms. Each phase's gate knife features two conductive blades, fortified with external compression springs on either side. Fine-tuning the spring height guarantees optimal contact pressure for the switch's gate knife. The operation utilizes a secure insulated hook stick for smooth opening and closing actions, while a self-locking device enhances reliability.

Working Environment:

Designed for altitudes not exceeding 1000 meters, this switch is built to perform.

Handles varied ambient temperatures, with maximums not above +40°C and minimums not below -30°C.

Withstands outdoor wind speeds of up to 35 meters/second, ensuring durability.

Capable of operating in seismic conditions up to 8 degrees; ideally installed where severe vibrations are infrequent.

Installation sites should ideally be free from gases, chemical deposits, salt mist, dust, dirt, or any explosive or corrosive mediums that could impair the switch's insulation and conductivity.

Note:

FOR CONDITIONS EXCEEDING NORMAL USE PARAMETERS, USERS ARE ENCOURAGED TO CONSULT WITH OUR COMPANY FOR CUSTOMIZED SOLUTIONS.

Installation, Use and Adjustment

Pre-installation work

1. Ensure all parts are free from dust and dirt, with a meticulous wiping of the insulating porcelain bottle's surface.
2. Thoroughly clean the wiring surfaces of the ground screw for optimal connectivity.
3. Apply a protective layer of industrial Vaseline to all rotating parts and contact areas to ensure smooth operation.
4. Inspect and adjust the contact surface, modifying the compression spring height in line with Table II to ensure compliance.
5. This switch is exclusively designed for hoisting use and is synergistically employed alongside transformers on the line.
6. The switch's rated current spans 200-400 ampere hours, typically utilizing three mounting holes. For currents of 600-1000A, three mounting holes are employed.

Conduct an annual inspection of the following switch components:
Regularly cleanse dirt from conductive parts, contact surfaces, and insulating porcelain bottle surfaces to maintain efficiency.

Examine all parts for potential damage, focusing on identifying any impairments or cracks in the insulating porcelain bottle.

Ensure the conductive part's contact surface remains in prime condition.

Detailed Photos

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications