High-Voltage Outdoor Isolator Switch for Effective Load Break Disconnection

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

Introducing our (H)GWBEB type outdoor high-voltage isolation switch-a cutting-edge solution blending reliability and efficiency for your power transmission needs. This isolation disconnect switch is meticulously engineered for operation on 10(12, 15, 24)kV high voltage power transmission and distribution lines, facilitating seamless opening and closing of single-phase or three-phase circuits. These actions occur without load, yet maintain voltage presence, ensuring optimal performance.

Ideally crafted for single-phase application within three-phase line systems, this switch excels with its straightforward design, affordability, and user-friendliness. Choose from rated currents of 200, 400, 600, 800, 1000, and 1250 amps, tailored for diverse requirements. Key components include a robust base, reliable post insulators, conductive parts, and a precise mechanical section. The innovative gate knife mechanism enhances circuit operation, opening and closing with precision. Each phase's gate knife integrates dual conductive blades, fortified with external compression springs on both sides. Fine-tune the spring height for optimal contact pressure. Operate with an insulated hook stick, supported by a self-locking feature for safety.

Working Environment:

Ensure an altitude not exceeding 1000 meters;

Maintain ambient temperature: maximum of +40°C and a minimum of -30°C;

Operate where outdoor wind speeds do not surpass 35 meters/second;

Designed to withstand seismic intensity up to 8 degrees; Select installation sites that avoid frequent severe vibrations.

Choose installation sites free from gases, chemical deposits, salt mist, dust, dirt, or other explosive or corrosive substances that could compromise the switch's insulation and conductivity.

Note:

WHEN THE ABOVE NORMAL USE CONDITIONS ARE EXCEEDED, THE USER CAN NEGOTIATE WITH THE COMPANY.

 

Installation, Use and Adjustment

Pre-installation work

1. Meticulously remove dust and dirt from parts, ensuring the insulating porcelain bottle's surface is pristine.
2. Thoroughly clean the wiring surface of the ground screw for optimal performance.
3. Apply industrial Vaseline to rotating parts and contact areas to ensure smooth operation.
4. Inspect contact surfaces and adjust compression spring height to ensure contact pressure aligns with Table II specifications.
5. This switch is specifically designed for hoisting operations and complements the transformer within the line.
6. The switch supports a rated current of 200-400 ampere hours, typically utilizing three mounting holes. For 600-1000A, three mounting holes are standard.

Conduct annual inspections on these switch components:
Diligently clean dirt from conductive parts, contact surfaces, and insulating porcelain bottle surfaces.

Examine all parts for possible damage, focusing particularly on any harm or cracks in the insulating porcelain bottle.

Ensure the conductive part's contact surface remains in excellent condition.

Detailed Photos

 

 

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications