High-Voltage Outdoor Disconnect Switch Load Break Isolator 15kv Chbeb

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

Introducing the (H)GWBEB type outdoor high-voltage isolation switch, a premium solution also known as an isolation disconnect switch. Engineered for excellence, it is tailored for deployment on 10(12, 15, 24)kV high voltage power transmission and distribution lines. This switch seamlessly opens and closes single-phase or three-phase circuits without load, even with voltage present.

This switch is meticulously crafted for single-phase use within three-phase line systems, standing out for its straightforward structure, cost-efficiency, and user-friendly operation. With a selection of rated currents at 200, 400, 600, 800, 1000, and 1250 amps, it includes a robust base, post insulators, conductive components, and a mechanical section. The innovative gate knife structure facilitates circuit operation, with each phase's gate knife featuring two conductive blades and external compression springs on both sides. The spring height is adjustable, ensuring optimal contact pressure for the gate knife. Operable with an insulated hook stick, it boasts a self-locking device for dependable action.

Working Environment:

Optimized for altitudes not exceeding 1000 meters;

Ambient temperature suitability: maximum of +40°C and minimum of -30°C;

Resilient against outdoor wind speeds up to 35 meters/second;

Designed to endure seismic intensities up to 8 degrees; installation should avoid frequent severe vibrations.

Installation sites must be free from gases, chemical deposits, salt mist, dust, dirt, or any explosive or corrosive mediums that could significantly impair the switch's insulation and conductivity.

Note:

SHOULD NORMAL WORKING CONDITIONS BE EXCEEDED, USERS ARE ENCOURAGED TO CONSULT WITH THE COMPANY FOR CUSTOM SOLUTIONS.

 

Installation, Use and Adjustment

Pre-installation work

1. Ensure all parts are meticulously cleaned of dust and dirt, with special care to the insulating porcelain bottle's surface.
2. Thoroughly scrub the wiring surface of the ground screw to ensure pristine condition.
3. Apply a protective layer of industrial Vaseline to all rotating parts and contact areas for optimal performance.
4. Inspect the contact surfaces and adjust the compression spring height to ensure contact pressure aligns with Table II specifications.
5. Exclusively suitable for hoisting applications, this switch is designed to operate alongside transformers on the line.
6. The switch's rated current ranges from 200-400 amperes with three mounting holes generally suffice. For 600-1000A, three mounting holes remain ideal.

Conduct annual inspections of the following switch components:
Diligently clean all dirt from conductive parts, contact surfaces, and insulating porcelain bottle surfaces.

Assess all components for any potential damage, with particular focus on detecting cracks or damage in the insulating porcelain bottle.

Verify the integrity of the conductive part's contact surface to ensure flawless operation.

Detailed Photos

 

 

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications