AC Isolator Switch with Load Break Disconnector for Outdoor Use

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

(H)GWBEB type outdoor high-voltage isolation switch, also famously known as an isolation disconnect switch, is meticulously engineered for seamless use on 10(12, 15, 24)kV high voltage power transmission and distribution lines. Its primary function is to proficiently open and close single-phase or three-phase circuits without load, even when voltage is present.

This switch is specifically designed for single-phase use within three-phase line systems. It stands out for its straightforward structure, exceptional cost-effectiveness, and user-friendly operation. With available rated currents of 200, 400, 600, 800, 1000, and 1250 amps, these switches incorporate a robust base, durable post insulators, high-conductivity parts, and a reliable mechanical section. The circuit is operated using an innovative gate knife structure, where each phase's gate knife is composed of two conductive blades, featuring external compression springs on both sides. The springs' height adjustment ensures the desired contact pressure for the gate knife, operated with an insulated hook stick for easy opening and closing actions. Additionally, it boasts a self-locking device for added security.

Working Environment:

The altitude must not exceed 1000 meters, ensuring optimal performance and safety.

Maintain ambient temperature within safe limits: maximum not above +40°C; minimum not below -30°C, for reliable functionality.

Outdoor wind speeds should not exceed 35 meters per second, protecting the switch from wind-induced damage.

Ensure seismic intensity does not exceed 8 degrees; the installation site should be free from frequent severe vibrations, preserving structural integrity.

The installation location must be free of gases, chemical deposits, salt mist, dust, dirt, or any explosive or corrosive mediums that could seriously compromise the switch's insulation and conductivity.

Note:

WHEN THE ABOVE NORMAL USE CONDITIONS ARE EXCEEDED, THE USER CAN NEGOTIATE WITH THE COMPANY.

Installation, Use and Adjustment

Pre-installation work

1. Thoroughly remove dust and dirt from all parts, and delicately wipe the surface of the insulating porcelain bottle to maintain pristine condition.
2. Carefully scrub the wiring surface of the ground screw to ensure optimal conductivity.
3. Apply a protective layer of industrial Vaseline to the rotating parts and contact areas to reduce wear and enhance smooth operation.
4. Inspect the contact surface meticulously and adjust the height of the compression spring so that the contact pressure adheres to the specifications in Table II.
5. This switch is exclusively designed for hoisting use and should be employed in tandem with the transformer on the line for optimal performance.
6. The rated current for this switch is between 200-400 ampere hours, generally utilizing three mounting holes. For 600-1000A uses, three mounting holes are also applied.

Perform regular annual checks on the following parts of the switch:
Remove any dirt from conductive parts, contact surfaces, and the surface of insulating porcelain bottles to maintain efficiency.

Inspect all parts for damage, with special attention to detecting any damage or cracks in the insulating porcelain bottle.

Verify that the contact surface of the conductive part remains in excellent condition.

Detailed Photos

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications