AC Isolation Switch Load Break Disconnector High Voltage Outdoor

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

(H)GWBEB type outdoor high-voltage isolation switch, often referred to as the isolation disconnect switch, is meticulously engineered for deployment on 10(12, 15, 24)kV high voltage power transmission and distribution lines. It is adept at opening and closing single-phase or three-phase circuits while under voltage, yet without load, ensuring stable and reliable operation.

This switch is tailored for single-phase applications within three-phase line systems, boasting a simplistic structure, cost-effectiveness, and user-friendly operation. Available with rated currents of 200, 400, 600, 800, 1000, and 1250 amps, these switches feature a base, post insulators, conductive components, and a mechanical section. The innovative gate knife structure facilitates efficient circuit opening and closing. Each phase's gate knife is equipped with dual conductive blades and external compression springs on both sides. By adjusting the spring height, optimal contact pressure for the switch's gate knife is achieved. Operated via an insulated hook stick, it incorporates a self-locking device to secure the switch's position.

Working Environment:

Altitude not exceeding 1000 meters;

Ambient temperature: maximum not surpassing +40°C; minimum not below -30°C;

Outdoor wind speed should not exceed 35 meters/second;

Seismic intensity should remain below 8 degrees; the installation site must be free from frequent severe vibrations.

The installation site must be devoid of gases, chemical deposits, salt mist, dust, dirt, or other explosive or corrosive mediums that might severely impair the switch's insulation and conductivity.

Note:

WHEN THE ABOVE NORMAL USE CONDITIONS ARE EXCEEDED, THE USER CAN NEGOTIATE WITH THE COMPANY.

Installation, Use and Adjustment

Pre-installation work

1. Thoroughly remove dust and dirt from all parts, and carefully clean the surface of the insulating porcelain bottle to ensure pristine conditions.
2. Meticulously scrub the wiring surface of the ground screw to maintain optimal connectivity.
3. Apply a fine layer of industrial Vaseline to the rotating parts and contact areas to reduce friction and enhance performance.
4. Inspect the contact surface and adjust the compression spring's height meticulously so that the contact pressure adheres to the specifications in Table II.
5. This switch is exclusively designed for hoisting use, operating seamlessly in conjunction with the transformer on the line.
6. The switch's rated current ranges between 200-400 ampere hours, typically utilizing three mounting holes. For 600-1000A, three mounting holes are standard.

Conduct an annual regular inspection of the following switch components:
Eradicate dirt from conductive parts, contact surfaces, and the insulating porcelain bottles' surface to maintain efficient conductivity.

Inspect all components for potential damage, with particular emphasis on the insulating porcelain bottle for any signs of damage or cracks.

Verify the integrity of the conductive part's contact surface to ensure uninterrupted operation.

Detailed Photos

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications