Innovative Outdoor Load Break Disconnector High Voltage Isolation Switch 10/12/15kv

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

(H)GWBEB type outdoor high-voltage isolation switch, expertly engineered for seamless functionality on 10(12, 15, 24)kV power transmission and distribution lines, serves as an isolation disconnect switch. This advanced device is perfect for managing single-phase or three-phase circuits, facilitating opening and closing without load amidst voltage presence.

Specially crafted for single-phase integration within three-phase line systems, this switch boasts a straightforward design, remarkable affordability, and user-friendly operation. Choose among rated currents of 200, 400, 600, 800, 1000, and 1250 amps. Ingeniously constructed, each switch comprises a robust base, durable post insulators, high-conductive parts, and an efficient mechanical section. Employing a sophisticated gate knife mechanism, the circuit is opened and closed with precision. Each gate knife phase is equipped with dual conductive blades, bolstered by external compression springs on each side. Fine-tuning the spring height ensures optimal contact pressure for the switch's gate knife. Operated with an insulated hook stick, this switch guarantees reliable opening and closing actions and incorporates a secure self-locking device.

Working Environment:

Altitude: Maximum not exceeding 1000 meters;

Ambient Temperature: Maximum up to +40°C; Minimum not below -30°C;

Outdoor Wind Speed: Not exceeding 35 meters/second;

Seismic Intensity: Must not exceed 8 degrees; the installation site should ideally avoid frequent severe vibrations.

The setup location must be devoid of gases, chemical residues, salt mist, dust, dirt, or any explosive or corrosive elements that could severely impact the switch's insulation and conductivity.

Note:

WHEN NORMAL USE CONDITIONS ARE EXCEEDED, USERS MAY CONSULT THE COMPANY FOR SPECIAL ARRANGEMENTS.

Installation, Use and Adjustment

Pre-installation work

1. Begin by meticulously removing all dust and dirt from the components, ensuring the insulating porcelain bottle's surface is gently wiped.
2. Thoroughly clean the wiring surface of the ground screw.
3. Apply a protective layer of industrial Vaseline on all rotating parts and contact areas.
4. Inspect the contact surface carefully and adjust the compression spring height to meet the specifications in Table II.
5. This switch is exclusively suited for hoisting use and is ideally paired with a transformer on the line.
6. With a rated current capacity of 200-400 ampere hours, this switch typically requires only three mounting holes. For 600-1000A, three mounting holes suffice.

Conduct annual inspections of the following switch components:
Ensure removal of any dirt from conductive parts, contact surfaces, and insulating porcelain bottle surfaces.

Inspect all parts vigilantly for damage, with particular emphasis on identifying any damage or cracks on the insulating porcelain bottle.

Verify that the conductive parts' contact surfaces maintain excellent condition.

Detailed Photos

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications