China Origin High Voltage Isolation Switch Load Break Disconnector

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

The (H)GWBEB type outdoor high-voltage isolation switch, commonly referred to as an isolation disconnect switch, is exquisitely crafted for deployment on 10(12, 15, 24)kV high voltage power transmission and distribution lines. It provides the indispensable function of opening and closing single-phase or three-phase circuits seamlessly without load but with voltage present.

This switch is ingeniously engineered for single-phase applications within three-phase line systems, boasting a simple yet effective structure. It stands out for its cost-effectiveness and unparalleled ease of use. With available rated currents of 200, 400, 600, 800, 1000, and 1250 amps, these switches are composed of a robust base, sturdy post insulators, reliable conductive parts, and a precision-engineered mechanical section. The gate knife structure is pivotal for the circuit's opening and closing, each phase being meticulously equipped with two conductive blades and external compression springs that flank both sides. By adjusting the spring height, optimal contact pressure for the switch's gate knife is achieved. Operation is effortlessly executed using an insulated hook stick for opening and closing actions, complemented by a sophisticated self-locking device.

Working Environment:

Ensure the altitude does not exceed 1000 meters;

Maintain ambient temperatures with a maximum not above +40°C and a minimum not below -30°C;

Outdoor winds should not surpass a speed of 35 meters/second;

The seismic intensity must not exceed 8 degrees; installation sites should be free from frequent severe vibrations.

The installation location must be devoid of gases, chemical deposits, salt mist, dust, dirt, or any explosive or corrosive elements that could critically impair the switch's insulation and conductivity.

Note:

WHEN THESE STANDARD USAGE CONDITIONS ARE EXCEEDED, USERS CAN ENGAGE IN DIALOGUE WITH THE COMPANY FOR CUSTOM SOLUTIONS.

Installation, Use and Adjustment

Pre-installation work

1. Meticulously remove dust and dirt from all components, ensuring the insulating porcelain bottle's surface is thoroughly wiped clean.
2. Scrub the wiring surface of the ground screw meticulously.
3. Apply a thin layer of industrial Vaseline to rotating parts and contact areas for optimal performance.
4. Inspect the contact surface diligently and adjust the compression spring's height to ensure the contact pressure aligns with Table II specifications.
5. This switch is specifically designed for hoisting applications and is intended to be used in synergy with the transformer on the line.
6. The switch's rated current ranges from 200-400 amperes, typically utilizing three mounting holes, and for 600-1000A applications, three mounting holes are also employed.

Conduct a thorough annual check of the following switch components:
Eliminate dirt from conductive parts, contact surfaces, and the insulating porcelain bottles' surfaces.

Vigilantly inspect all components for any damage, with particular emphasis on identifying cracks or damage on the insulating porcelain bottle.

Ascertain that the contact surface of the conductive part is in pristine condition.

Detailed Photos

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications