Outdoor High Voltage Isolation Switch Load Break Disconnector

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

(H)GWBEB type outdoor high-voltage isolation switch, often referred to as an isolation disconnect switch, is expertly engineered for operation on 10(12, 15, 24)kV high voltage power transmission and distribution lines. It is perfect for opening and closing single-phase or three-phase circuits where no load is present but voltage exists, ensuring seamless power management.

This switch is meticulously crafted for single-phase application within three-phase line systems and stands out due to its uncomplicated yet highly efficient structure, budget-friendly nature, and user-friendly operation. Offered in a range of rated currents: 200, 400, 600, 800, 1000, and 1250 amps, it is composed of a robust base, durable post insulators, conductive elements, and a mechanical section. Utilizing an innovative gate knife structure for precise circuit control, each phase's gate knife deploys two conductive blades, accompanied by external compression springs on both sides. By adjusting the spring height, optimal contact pressure for the switch's gate knife is ensured. An insulated hook stick is employed for operational ease, complemented by a reliable self-locking device.

Working Environment:

Altitude should not exceed 1000 meters;

Ambient temperature: maximum should not surpass +40°C; minimum should not drop below -30°C;

Outdoor wind velocity should be no greater than 35 meters/second;

Seismic intensity should remain below 8 degrees; the installation area must not be subjected to frequent severe vibrations.

The installation environment should remain free from gases, chemical deposits, salt mist, dust, dirt, or other explosive or corrosive substances that could significantly impair the switch's insulation and conductivity capabilities.

Note:

WHEN THE ABOVE NORMAL USE CONDITIONS ARE EXCEEDED, USERS ARE ENCOURAGED TO NEGOTIATE WITH THE COMPANY.

 

Installation, Use and Adjustment

Pre-installation work

1. Carefully eliminate dust and dirt from all components, ensuring the insulating porcelain bottle's surface is thoroughly cleansed.
2. Meticulously scrub the wiring surface of the ground screw.
3. Apply a smooth layer of industrial Vaseline to all rotating parts and contact areas to ensure longevity and performance.
4. Conduct a thorough inspection of the contact surface and adjust the compression spring height to meet the specifications outlined in Table II, ensuring effective contact pressure.
5. This switch is solely designed for hoisting use and is intended to be used in conjunction with the transformer on the line, offering reliable integration.
6. The switch caters to rated currents between 200-400 ampere hours, typically utilizing just three mounting holes. For 600-1000A, three mounting holes are consistently used.

Annual routine checks involve inspecting these key components of the switch:
Remove any accumulated dirt from conductive parts, contact surfaces, and the insulating porcelain bottle's exterior.

Thoroughly inspect all components for potential damage, with particular attention to the insulating porcelain bottle for any cracks or impairment.

Ensure the contact surface of the conductive part is in pristine condition, maintaining its efficiency.

Detailed Photos

 

 

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications