Load Break Disconnector Outdoor High Voltage Isolator Switch 15kv

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

Introducing the (H)GWBEB type Outdoor High-Voltage Isolation Switch, also referred to as the Isolation Disconnect Switch. Engineered for optimal performance, this switch excels in managing 10(12, 15, 24)kV high voltage power transmission and distribution lines. It seamlessly facilitates the opening and closing of single-phase or three-phase circuits, even under the presence of voltage but without load.

Designed to integrate effortlessly into three-phase line systems, this switch is renowned for its straightforward structure, budget-friendly pricing, and user-friendly operation. It offers a range of rated currents including 200, 400, 600, 800, 1000, and 1250 amps. The switch is meticulously crafted with a base, post insulators, conductive elements, and a mechanical component. The innovative gate knife structure ensures efficient circuit opening and closing. Each phase incorporates a gate knife with dual conductive blades, enhanced by external compression springs on either side. By adjusting the spring height, the ideal contact pressure for the switch's gate knife is achieved, guaranteeing reliable performance. The switch is operated with an insulated hook stick and is equipped with a self-locking device for added security.

Working Environment:

Designed for altitudes not exceeding 1000 meters;

Capable of withstanding ambient temperature extremes: maximum not exceeding +40°C; minimum not dropping below -30°C;

Robust construction endures outdoor wind speeds up to 35 meters per second;

Built to handle seismic activity with intensity not exceeding 8 degrees; ideal for installation sites with minimal severe vibrations.

Installation sites should be free from gases, chemical deposits, salt mist, dust, dirt, and other explosive or corrosive mediums that could severely impact the switch's insulation and conductivity.

Note:

IF CONDITIONS EXCEED THE ABOVE NORMAL USE PARAMETERS, USERS ARE ENCOURAGED TO DISCUSS ALTERNATIVE SOLUTIONS WITH THE COMPANY.

Installation, Use, and Adjustment

Pre-installation work

1. Ensure all parts are free from dust and dirt, and meticulously clean the surface of the insulating porcelain bottle.
2. Thoroughly clean the wiring surface of the ground screw for optimal conductivity.
3. Apply a protective layer of industrial Vaseline to the rotating parts and contact areas to enhance longevity and performance.
4. Inspect the contact surface and adjust the compression spring height to ensure the contact pressure meets specifications outlined in Table II.
5. This switch is designed exclusively for hoisting applications and is intended for use alongside transformers on the line.
6. Rated for 200-400 amperes, this switch typically utilizes three mounting holes. For 600-1000A applications, three mounting holes are standard.

Conduct an annual inspection of the following components:
Regularly clean dirt from conductive elements, contact surfaces, and insulating porcelain bottle surfaces to maintain efficiency.

Inspect all components for any damage, with particular attention to identifying any damage or cracks in the insulating porcelain bottle.

Ensure the contact surface of the conductive part remains in prime condition.

Detailed Photos

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications