Advanced Outdoor High Voltage Load Break Disconnector Isolator Switch 10/12/15kv

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

Introducing the (H)GWBEB type outdoor high-voltage isolation switch, an innovative solution also known as an isolation disconnect switch. This specialized device is meticulously designed for optimal performance on 10(12, 15, 24)kV high voltage power transmission and distribution lines. It efficiently opens and closes single-phase or three-phase circuits while voltage is present, without bearing the load. Experience the seamless operation of high-voltage management with our advanced isolation switch.

Crafted for excellence, this switch is tailored for single-phase use within sophisticated three-phase line systems. It shines with its simple yet robust structure, ensuring cost-effectiveness and user-friendly operation. Choose from a range of rated currents: 200, 400, 600, 800, 1000, and 1250 amps. Built with precision, each switch is composed of a sturdy base, reliable post insulators, high-quality conductive parts, and a precision-engineered mechanical section. Employing a gate knife structure to manage circuit operations, each phase's gate knife incorporates two conductive blades with external compression springs on both sides. By adjusting the spring height, the switch achieves the perfect contact pressure necessary for optimal gate knife function. Operate this switch effortlessly with an insulated hook stick for smooth opening and closing, supported by a self-locking device for enhanced safety and reliability.

Working Environment:

Install this switch confidently in altitudes not exceeding 1000 meters;

Designed to endure ambient temperatures: with a maximum threshold of +40°C and a minimum of -30°C, ensuring adaptability to varied climatic conditions;

Engineered to withstand outdoor wind speeds of up to 35 meters per second;

Rated for seismic intensities up to 8 degrees, with an installation site free from frequent severe vibrations.

For optimal performance, ensure the installation site is devoid of gases, chemical deposits, salt mist, dust, dirt, or other explosive or corrosive media that could seriously impact the switch's insulation and conductivity capabilities.

Note:

WHEN OPERATING BEYOND THE SPECIFIED NORMAL CONDITIONS, USERS ARE INVITED TO CONSULT WITH THE COMPANY FOR TAILORED SOLUTIONS.

Installation, Use and Adjustment

Pre-installation work

1. Prepare by meticulously removing dust and dirt from all parts, followed by a thorough cleaning of the insulating porcelain bottle's surface to ensure pristine condition.
2. Clean the wiring surface of the ground screw meticulously for enhanced connectivity.
3. Lubricate all rotating parts and contact areas with a layer of industrial Vaseline to ensure smooth operation and longevity.
4. Inspect the contact surface diligently and adjust the compression spring's height to ensure the contact pressure is aligned with the standards outlined in Table II.
5. This switch is purpose-built for hoisting applications and is ideally used in conjunction with transformers on the line for optimal performance.
6. The switch caters to rated currents of 200-400 ampere hours, generally utilizing three mounting holes for secure installation. For 600-1000A, three mounting holes are utilized for robust support.

Conduct annual inspections to ensure peak performance by checking the following parts of the switch:
Thoroughly remove dirt from conductive parts, contact surfaces, and the surface of insulating porcelain bottles for optimal conductivity.

Inspect all components meticulously for any damage, with a focus on identifying any damage or cracks in the insulating porcelain bottle.

Verify the quality of the contact surface of the conductive part is maintained in excellent condition.

Detailed Photos

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications