High Voltage Outdoor Disconnect Switch Load Break Disconnector Isolator 10/12/15kv

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

Introducing the (H)GWBEB type outdoor high-voltage isolation switch, an engineering marvel in the realm of power transmission and distribution. Crafted specifically for 10(12, 15, 24)kV high voltage lines, this isolation disconnect switch is adept at managing single-phase or three-phase circuits with finesse, even when voltage is present.

Engineered for unmatched efficiency, this switch is tailored for single-phase applications within three-phase systems. Its robust yet streamlined design offers remarkable cost-effectiveness and user-friendly operation. With a spectrum of rated currents—200, 400, 600, 800, 1000, and 1250 amps—it is a versatile solution featuring a base, post insulators, conductive elements, and a mechanical section. The innovative gate knife configuration ensures precise circuit engagement, where each phase’s knife includes dual conductive blades, bolstered by external compression springs. These springs are adjustable for optimal contact pressure. The switch is cleverly operated via an insulated hook stick and includes a self-locking mechanism for secure functionality.

Working Environment:

Altitude must be below 1000 meters;

Ambient temperature should comfortably range from a maximum of +40°C to a chilly minimum of -30°C;

Tolerant to outdoor wind speeds up to 35 meters/second;

Designed to withstand seismic intensities of up to 8 degrees; the installation environment should remain free of frequent severe vibrations.

The installation site must be devoid of hazardous gases, chemical deposits, salt mist, dust, dirt, or any explosive or corrosive mediums that could compromise the switch's superior insulation and conductivity.

Note:

SHOULD THE NORMAL OPERATING CONDITIONS BE EXCEEDED, USERS ARE ENCOURAGED TO DISCUSS OPTIONS WITH THE COMPANY.

Installation, Use, and Adjustment

Pre-installation work

1. Thoroughly remove any dust and dirt from all components, and meticulously clean the surface of the insulating porcelain bottle to ensure maximum performance.
2. Carefully scrub the wiring surface of the ground screw to maintain optimal conductivity.
3. Apply a meticulous layer of industrial Vaseline to all rotating parts and contact areas, ensuring smooth operation and protection against wear.
4. Examine the contact surface diligently and adjust the height of the compression spring in strict accordance with Table II to guarantee appropriate contact pressure.
5. This switch is exclusively designed for hoisting operations and should be used in synergy with the transformer on the line for optimal efficiency.
6. The switch’s rated current spans from 200-400 ampere hours, typically requiring just three mounting holes for installation. For 600-1000A, three mounting holes are similarly utilized.

Annually conduct the following thorough inspections of the switch:
Diligently remove any accumulated dirt from conductive parts, contact surfaces, and the insulating porcelain bottle to maintain pristine condition.

Inspect all components for any signs of damage, with particular attention given to the insulating porcelain bottle, checking for any potential damage or cracks.

Ensure the contact surfaces of the conductive parts maintain their integrity and function.

Detailed Photos

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications