Reliable Load Break Isolator Switch for Outdoor Use

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter
• Package Size: 45.00cm * 55.00cm * 38.00cm
• Package Gross Weight: 20.000kg

Product Description

Product Description

(H)GWBEB type outdoor high-voltage isolation switch, also known as an isolation disconnect switch, is meticulously engineered for 10(12, 15, 24)kV high voltage power transmission and distribution lines. It enables the seamless opening and closing of single-phase or three-phase circuits without load, while voltage is still present, ensuring operational safety and reliability.

This switch is ideally designed for single-phase use within three-phase line systems, boasting a straightforward structure, exceptional cost-efficiency, and user-friendly operation. It accommodates rated currents of 200, 400, 600, 800, 1000, and 1250 amps. Its construction comprises a base, robust post insulators, conductive components, and a sophisticated mechanical section. The innovative gate knife structure provides optimal circuit control, with each phase's gate knife featuring dual conductive blades and external compression springs positioned on both sides. By adjusting the spring height, the necessary contact pressure is achieved for the gate knife's effective operation. The switch is conveniently operated using an insulated hook stick for opening and closing actions, and is equipped with a self-locking mechanism for enhanced safety.

Working Environment:

Designed for altitudes not exceeding 1000 meters;

Ambient temperature: maximum cap of +40°C; minimum threshold of -30°C;

Capable of withstanding outdoor wind speeds not exceeding 35 meters/second;

Withstands seismic intensity up to 8 degrees; installation site should be free from frequent severe vibrations.

The installation site should be free from gases, chemical deposits, salt mist, dust, dirt, or other explosive or corrosive mediums that could significantly impair the switch's insulation and conductivity.

Note:

WHEN THE ABOVE NORMAL USE CONDITIONS ARE EXCEEDED, USERS ARE ENCOURAGED TO NEGOTIATE WITH THE COMPANY FOR POSSIBLE SOLUTIONS.

 

Installation, Use and Adjustment

Pre-installation work

1. Thoroughly remove any dust and dirt from the components, ensuring the insulating porcelain bottle's surface is meticulously wiped clean.
2. Meticulously scrub the wiring surface of the ground screw for optimal connectivity.
3. Apply a protective layer of industrial Vaseline to the rotating parts and contact areas to prevent corrosion and ensure smooth operation.
4. Inspect the contact surfaces and adjust the compression spring height to ensure the contact pressure is consistent with Table II's specifications.
5. This switch is exclusively designed for hoisting use and is effectively utilized in conjunction with the transformer on the line.
6. The rated current for this switch ranges from 200-400 ampere hours, typically utilizing three mounting holes. For 600-1000A, it also utilizes three mounting holes.

Regularly conduct thorough annual inspections of the following switch components:
Remove accumulated dirt from conductive parts, contact surfaces, and the insulating porcelain bottle's surface to maintain optimal performance.

Examine all components for potential damage, with a focused inspection on the insulating porcelain bottle for any signs of damage or cracks.

Ensure the contact surface of the conductive part is in excellent condition.

Detailed Photos

 

 

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications