Chbeb High Voltage Isolation Switch for Outdoor Load Break Applications

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

(H)GWBEB type outdoor high-voltage isolation switch, also widely recognized as an isolation disconnect switch, is meticulously engineered for deployment on 10(12, 15, 24)kV high voltage power transmission and distribution lines. Its primary function is to seamlessly open and close single-phase or three-phase circuits that are energized but not carrying a load.

This switch is expertly crafted for single-phase usage within three-phase line systems. It boasts a simple yet robust structure, making it both cost-efficient and exceptionally user-friendly. It is offered in various rated currents such as 200, 400, 600, 800, 1000, and 1250 amps. Each switch comprises a sturdy base, post insulators, conductive components, and a mechanical section. The unique gate knife structure enables precise circuit interruption and closure. Each phase's gate knife is formed by two conductive blades, enhanced with external compression springs on either side. By adjusting the spring height, you achieve the necessary contact pressure for optimal performance. Operating the switch is made effortless with an insulated hook stick for opening and closing, and it includes a reliable self-locking mechanism.

Working Environment:

Designed for altitudes not exceeding 1000 meters;

Capable of operating in ambient temperatures with a maximum not surpassing +40°C; and a minimum not dropping below -30°C;

Withstands outdoor wind speeds up to 35 meters/second;

Built to endure seismic intensity not exceeding 8 degrees; the installation site should remain free from frequent severe vibrations to ensure stability.

The installation environment must remain clear of gases, chemical deposits, salt mist, dust, dirt, or other explosive or corrosive substances which could severely impact the switch's insulation and conductivity.

Note:

SHOULD THE ABOVE TYPICAL USE CONDITIONS BE SURPASSED, USERS ARE ENCOURAGED TO ENGAGE IN DISCUSSIONS WITH THE COMPANY FOR TAILORED SOLUTIONS.

Installation, Use and Adjustment

Pre-installation work

1. Diligently remove any dust and dirt from components, and thoroughly wipe the insulating porcelain bottle's surface to ensure cleanliness.
2. Clean the wiring surface of the ground screw meticulously.
3. Apply a protective layer of industrial Vaseline to all rotating parts and contact areas to enhance functionality.
4. Verify the contact surface and adjust the height of the compression spring to ensure that the contact pressure aligns perfectly with the specifications in Table II.
5. This switch is exclusively designed for hoisting applications and is intended to function in conjunction with the transformer on the transmission line.
6. The switch accommodates a rated current from 200 to 400 ampere hours, typically utilizing three mounting holes. For 600 to 1000A, three mounting holes are commonly employed.

Conduct a thorough annual inspection of the following switch components:
Meticulously eliminate any dirt from conductive parts, contact surfaces, and the insulating porcelain bottles' surfaces.

Inspect all components for potential damage, with a particular focus on identifying any damage or cracks in the insulating porcelain bottle.

Ensure the contact surface of the conductive part maintains optimal condition.

Detailed Photos

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications