China Origin Customizable Outdoor Isolation Switch 45*55*38mm Specification

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

(H)GWBEB type outdoor high-voltage isolation switch, a sophisticated isolation disconnect switch, specifically crafted to serve your needs on 10(12, 15, 24)kV high voltage power transmission and distribution lines. This robust switch enables the seamless opening and closing of single-phase or three-phase circuits, effortlessly managing voltage presence without load.

Tailored for single-phase applications within three-phase line systems, this switch stands out with its straightforward design, economical nature, and user-friendly functionality. Explore a variety of rated currents: 200, 400, 600, 800, 1000, and 1250 amps to suit your needs. The switch comprises a sturdy base, reliable post insulators, conductive components, and a mechanical section. Ingeniously engineered, it employs a gate knife structure for precise circuit control. Each phase's gate knife features dual conductive blades, with external compression springs on either side. By adjusting the spring height, optimal contact pressure for the switch's gate knife is achieved. Operate effortlessly with an insulated hook stick for opening and closing actions, bolstered by a secure self-locking device.

Working Environment:

Altitude not exceeding 1000 meters;

Ambient temperature: maximum not above +40°C; minimum not below -30°C;

Outdoor wind speed not exceeding 35 meters/second;

Seismic intensity not exceeding 8 degrees; the installation site should be free from frequent severe vibrations.

Ensure the installation environment is clear of gases, chemical deposits, salt mist, dust, dirt, or other explosive or corrosive elements that could adversely impact the switch's insulation and conductivity.

Note:

WHEN THE ABOVE NORMAL USE CONDITIONS ARE EXCEEDED, THE USER CAN NEGOTIATE WITH THE COMPANY.

Installation, Use and Adjustment

Pre-installation work

1. Thoroughly remove dust and dirt from all components, and delicately clean the surface of the insulating porcelain bottle to ensure peak performance.
2. Meticulously scrub the wiring surface of the ground screw for optimal connectivity.
3. Apply a protective layer of industrial Vaseline to rotating parts and contact areas to facilitate smooth operation.
4. Inspect the contact surface and adjust the spring height to guarantee that the contact pressure aligns with Table II specifications.
5. This switch is exclusively designed for hoist installations, ideally used in conjunction with transformers on the line.
6. The rated current for this switch spans 200-400 amperes, typically utilizing three mounting holes. For 600-1000A applications, three mounting holes are also standard.

Regularly conduct an annual inspection of the following switch components:
Diligently remove any dirt from conductive parts, contact surfaces, and the surface of insulating porcelain bottles.

Perform a comprehensive check for any damage, with particular attention to the insulating porcelain bottle, ensuring there are no damages or cracks.

Verify the integrity of the conductive part's contact surface to ensure optimal performance.

Detailed Photos

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications