Customizable High Voltage Load Break Disconnector for Outdoor Use

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter
• Package Size: 45.00cm * 55.00cm * 38.00cm
• Package Gross Weight: 20.000kg

Product Description

Product Description

The (H)GWBEB type outdoor high-voltage isolation switch, beautifully engineered as an isolation disconnect switch, is expertly crafted for applications in 10(12, 15, 24)kV high voltage power transmission and distribution lines. Designed to efficiently facilitate the opening and closing of single-phase or three-phase circuits, this switch operates without load yet maintains voltage presence. It stands as a robust solution for power management.

This switch, tailored for single-phase deployment within three-phase line systems, boasts a straightforward design, exceptional cost-efficiency, and user-friendly operation. With available rated currents of 200, 400, 600, 800, 1000, and 1250 amps, it is composed of a base, post insulators, conductive components, and a mechanical section. The innovative gate knife structure ensures precise circuit management, with each phase's gate knife featuring dual conductive blades flanked by external compression springs. Adjustments to spring height guarantee optimal contact pressure. The unit's operation via an insulated hook stick and its integral self-locking feature enhance safety and reliability.

Working Environment:

Positioned at altitudes not exceeding 1000 meters;

Capable of withstanding ambient temperatures up to +40°C and as low as -30°C;

Designed for areas where outdoor wind speed does not exceed 35 meters/second;

Built to endure seismic intensities not exceeding 8 degrees, ensuring stability in areas with minimal severe vibrations.

The installation environment should remain free from gases, chemical deposits, salt mist, dust, dirt, or other explosive or corrosive mediums that could severely impact the switch's insulation and conductivity.

Note:

SHOULD NORMAL USE CONDITIONS BE SURPASSED, USERS ARE ENCOURAGED TO DISCUSS OPTIONS WITH THE COMPANY.

 

Installation, Use and Adjustment

Pre-installation work

1. Meticulously remove any dust and debris from components, ensuring the insulating porcelain bottle's surface is thoroughly cleaned.
2. Carefully clean the wiring surface of the ground screw for optimal performance.
3. Apply an even coat of industrial Vaseline on rotating parts and contact areas to enhance operation smoothness.
4. Verify the contact surface and adjust the compression spring height to align with specifications in Table II, ensuring consistent contact pressure.
5. This switch is exclusively suitable for hoisting applications and is designed for integration with transformers along the line.
6. The switch's rated current spans 200-400 ampere hours, typically necessitating only three mounting holes. For 600-1000A configurations, three mounting holes are standard.

Annually perform a comprehensive check on these essential parts of the switch:
Thoroughly clean dirt from conductive parts, contact surfaces, and insulating porcelain bottle surfaces to maintain high performance.

Inspect all components for any damage, with special attention given to the insulating porcelain bottle for signs of damage or cracks.

Verify the integrity of the conductive part's contact surface for optimal functionality.

Detailed Photos

 

 

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications