China Origin 45*55*38mm Load Break Disconnector for High-Voltage Isolator Switch

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

The (H)GWBEB type outdoor high-voltage isolation switch, often referred to as an isolation disconnect switch, is a premium solution engineered for deployment on 10(12, 15, 24)kV high voltage power transmission and distribution lines. It is meticulously crafted to facilitate the seamless opening and closing of single-phase or three-phase circuits without load, ensuring operational integrity even with voltage present.

This sophisticated switch is specifically tailored for single-phase applications within three-phase line systems. It stands out with its elegantly simple structure, remarkable cost-effectiveness, and user-friendly operation. Available with a range of rated currents: 200, 400, 600, 800, 1000, and 1250 amps, this switch comprises a robust base, resilient post insulators, reliable conductive parts, and a precise mechanical section. It employs an innovative gate knife structure for circuit management, with each phase comprising two conductive blades fortified with external compression springs on both sides to ensure optimal contact pressure. Adjustments to the spring height finesse this pressure to ideal levels. The switch operation is conducted effortlessly using an insulated hook stick, complemented by a secure self-locking device to maintain stability.

Working Environment:

Altitude not exceeding 1000 meters;

Ambient temperature: max +40°C; min -30°C;

Outdoor wind speed not exceeding 35 meters/second;

Seismic intensity not exceeding 8 degrees; installation site must be free from frequent severe vibrations.

The installation site must be devoid of gases, chemical deposits, salt mist, dust, dirt, or other explosive or corrosive mediums that could compromise the switch's insulation and conductivity.

Note:

WHEN THE ABOVE NORMAL USE CONDITIONS ARE EXCEEDED, USERS CAN ENTER INTO NEGOTIATIONS WITH THE COMPANY.

 

Installation, Use and Adjustment

Pre-installation work

1. Meticulously remove dust and dirt from all components, ensuring the surface of the insulating porcelain bottle is carefully wiped clean.
2. Thoroughly scrub the wiring surface of the ground screw to guarantee optimal conductivity.
3. Administer a protective layer of industrial Vaseline to all rotating parts and contact areas to enhance longevity and performance.
4. Inspect the contact surface and finetune the compression spring height to align with Table II standards, ensuring optimal contact pressure.
5. This switch is exclusively designed for hoisting applications, harmoniously integrated with the transformer on the line.
6. The rated current for this switch ranges from 200-400 ampere hours, typically necessitating only three mounting holes; for 600-1000A applications, three mounting holes are utilized.

It is crucial to perform an annual inspection of the following switch components:
Diligently cleanse dirt from conductive parts, contact surfaces, and the surface of insulating porcelain bottles to maintain peak performance.

Conduct a comprehensive inspection for damage across all parts, with particular scrutiny on the insulating porcelain bottle for any signs of cracks or damage.

Ensure the contact surface of the conductive part remains in pristine condition.

Detailed Photos

 

 

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications