Efficient Outdoor Isolator Switch Load Break Disconnector High Voltage 10/12/15kv

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

(H)GWBEB type outdoor high-voltage isolation switch, a premier choice for power transmission and distribution at 10(12, 15, 24)kV levels, serves as an essential isolation disconnect switch. Specifically engineered for seamlessly opening and closing single-phase or three-phase circuits under voltage conditions, this switch guarantees unparalleled reliability in high-voltage environments.

Designed for single-phase applications within three-phase line systems, this switch boasts a straightforward yet efficient design, offering cost-effectiveness and user-friendly operation. It supports rated currents of 200, 400, 600, 800, 1000, and 1250 amps. The assembly includes a robust base, durable post insulators, highly conductive parts, and a mechanical section, all to ensure top-notch performance. Utilizing a gate knife structure for circuit operations, each phase's gate knife comprises two conductive blades, complemented by external compression springs. Adjusting these springs ensures optimal contact pressure, which is vital for the switch's efficiency. Operation is made easy with an insulated hook stick, providing smooth actions, while a robust self-locking device enhances operational safety.

Working Environment:

Altitude should not exceed 1000 meters;

Ambient temperature: maximum temperature must not exceed +40°C; minimum temperature should not drop below -30°C;

Outdoor wind speed should remain below 35 meters/second;

Seismic intensity should not surpass 8 degrees; the installation area must be free from frequent severe vibrations.

The installation location must be devoid of gases, chemical deposits, salt mist, dust, dirt, or any other explosive or corrosive substances that could critically impair the switch's insulation and conductivity.

Note:

IF THE ABOVE NORMAL USE CONDITIONS ARE EXCEEDED, USERS ARE ENCOURAGED TO NEGOTIATE WITH THE COMPANY FOR TAILORED SOLUTIONS.

Installation, Use and Adjustment

Pre-installation Preparation

1. Thoroughly clean and remove dust and dirt from all components, ensuring a pristine surface on the insulating porcelain bottle.
2. Meticulously clean the wiring surface of the ground screw to ensure optimal connection.
3. Apply a protective layer of industrial Vaseline to all rotating parts and contact areas for smooth operation.
4. Inspect the contact surface and meticulously adjust the height of the compression springs to ensure contact pressure aligns with specifications in Table II.
5. This switch is exclusively designed for hoisting applications and operates in tandem with transformers on the line.
6. The switch's rated current spans 200-400 ampere hours, typically requiring just three mounting holes. For currents of 600-1000A, three mounting holes are utilized.

Conduct an annual check of these essential switch components:
Eliminate dirt from conductive parts, contact surfaces, and the insulating porcelain bottle's surface to maintain optimal performance.

Carefully inspect all components for damage, with particular attention to the insulating porcelain bottle, checking for any signs of damage or cracks.

Ensure the conductive part's contact surface maintains excellent condition.

Detailed Photos

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications