China Origin Customizable High Voltage Isolation Switch Load Break Disconnector

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

Elevate your power management with the (H)GWBEB type outdoor high-voltage isolation switch, also referred to as the isolation disconnect switch. Expertly engineered for seamless operation on 10(12, 15, 24)kV high voltage power transmission and distribution lines, this switch is adept at opening and closing single-phase or three-phase circuits while voltage is present, ensuring reliability and safety in your electrical infrastructure.

Crafted for single-phase functionality within three-phase line systems, this switch exemplifies simplicity, affordability, and user-friendliness. Offering an impressive range of rated currents—200, 400, 600, 800, 1000, and 1250 amps—these switches are meticulously composed of a base, post insulators, conductive components, and a mechanical section. The innovative gate knife structure facilitates the efficient opening and closing of circuits. Each phase's gate knife is ingeniously equipped with dual conductive blades and external compression springs on each side. By adjusting the spring height, optimal contact pressure for the switch's gate knife is achieved. Operation is effortlessly managed using an insulated hook stick, complemented by a self-locking device for enhanced security.

Working Environment:

Designed for altitudes not exceeding 1000 meters;

Withstands ambient temperatures with a maximum limit of +40°C and a minimum limit of -30°C;

Handles outdoor wind speeds up to 35 meters/second;

Built to endure seismic intensities up to 8 degrees; the installation site must remain free of frequent severe vibrations.

The installation site must be free from gases, chemical deposits, salt mist, dust, dirt, or any other explosive or corrosive mediums that could significantly impair the switch's insulation and conductivity.

Note:

IF THE NORMAL USE CONDITIONS MENTIONED ABOVE ARE EXCEEDED, USERS ARE ENCOURAGED TO NEGOTIATE WITH THE COMPANY FOR CUSTOMIZED SOLUTIONS.

Installation, Use and Adjustment

Pre-installation work

1. Thoroughly eliminate any dust and dirt from components, and meticulously clean the surface of the insulating porcelain bottle to ensure optimal performance.
2. Diligently scrub the wiring surface of the ground screw for enhanced connectivity.
3. Apply a protective layer of industrial Vaseline to all rotating parts and contact areas to ensure smooth operation.
4. Scrutinize the contact surface, adjusting the compression spring height to meet the stipulated contact pressure as per Table II.
5. This switch is specifically designed for hoisting applications and is intended for use in conjunction with the transformer on the line.
6. Suitable for rated currents between 200-400 ampere hours, typically utilizing three mounting holes; for 600-1000A, three mounting holes are utilized for secure installation.

Conduct an annual inspection of the following switch components to ensure reliable performance:
Diligently remove any accumulated dirt from conductive parts, contact surfaces, and the insulating porcelain bottle's surface.

Examine all parts for potential damage, with particular attention to inspecting the insulating porcelain bottle for cracks or other damage.

Ensure the contact surface of the conductive part maintains optimal integrity and function.

Detailed Photos

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications