High Voltage Outdoor Isolator Switch with Customizable Options

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

Introducing the (H)GWBEB type outdoor high-voltage isolation switch, a cutting-edge solution also known as an isolation disconnect switch. This advanced equipment is expertly designed for seamless operation on 10(12, 15, 24)kV high voltage power transmission and distribution lines, efficiently opening and closing single-phase or three-phase circuits even when voltage is present, though without load.

Engineered for exceptional performance in single-phase usage within three-phase line systems, this switch is celebrated for its straightforward structure, economic viability, and user-friendly interface. With an array of available rated currents such as 200, 400, 600, 800, 1000, and 1250 amps, these switches boast a robust construction featuring a base, post insulators, conductive components, and a mechanical section. It utilizes a sophisticated gate knife structure, where each phase's gate knife is equipped with dual conductive blades and external compression springs on either side. By expertly adjusting the spring height, the desired contact pressure for the switch's gate knife is effortlessly achieved. The switch is seamlessly operated using an insulated hook stick for opening and closing actions and is well-equipped with a reliable self-locking device.

Working Environment:

Altitude not exceeding 1000 meters;

Ambient temperature: maximum not above +40°C; minimum not below -30°C;

Outdoor wind speed not exceeding 35 meters/second;

Seismic intensity shall not exceed 8 degrees; the installation site must be free from frequent severe vibrations.

The installation location should be devoid of gases, chemical deposits, salt mist, dirt, dust, or other explosive or corrosive mediums that may significantly impact the switch's insulation and conductivity.

Note:

WHEN THE ABOVE NORMAL USE CONDITIONS ARE EXCEEDED, USERS CAN ENGAGE IN NEGOTIATIONS WITH THE COMPANY.

Installation, Use and Adjustment

Pre-installation work

1. Thoroughly clean and remove any dust and dirt from the components, and meticulously wipe the surface of the insulating porcelain bottle to ensure optimal performance.
2. Carefully scrub the wiring surface of the ground screw for a clean installation.
3. Apply a protective layer of industrial Vaseline to the rotating parts and contact areas to maintain efficient operation.
4. Inspect the contact surface and finely adjust the height of the compression spring to ensure the contact pressure aligns perfectly with the specifications outlined in Table II.
5. This switch is specifically designed for hoisting use and functions harmoniously in conjunction with transformers on the line.
6. The rated current options for this switch range from 200-400 amperes, commonly utilizing just three mounting holes, while options from 600-1000A also employ three mounting holes.

Conduct a thorough annual inspection of the following switch components:
Remove any dirt from conductive parts, contact surfaces, and the surface of insulating porcelain bottles to ensure optimal efficiency.

Carefully examine all parts for potential damage, with heightened focus on inspecting the insulating porcelain bottle for any signs of damage or cracks.

Verify that the contact surface of the conductive part is in optimal condition.

Detailed Photos

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications