China Origin Customizable High-Voltage Isolation Switch Load Break Disconnector - (H) Gwbeb

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

The (H)GWBEB type outdoor high-voltage isolation switch, often referred to as an isolation disconnect switch, is expertly crafted for deployment on 10(12, 15, 24)kV high voltage power transmission and distribution lines. It serves the primary purpose of safely opening and closing single-phase or three-phase circuits without bearing load but maintaining voltage presence. A crucial asset for energy systems, it promises reliable performance.

Designed specifically for single-phase application within three-phase line systems, this switch stands out for its straightforward design, economic efficiency, and user-friendly operation. Available in rated currents of 200, 400, 600, 800, 1000, and 1250 amps, each switch is constructed with a base, post insulators, conductive components, and a mechanical segment. Utilizing an innovative gate knife structure, the opening and closing of circuits become seamless. Each phase's gate knife is engineered with dual conductive blades, complemented by external compression springs that flank both sides. By fine-tuning the spring height, the optimal contact pressure for the switch's gate knife is achieved. Its operation is facilitated with an insulated hook stick for executing opening and closing actions, complete with a self-locking mechanism for enhanced safety.

Working Environment:

Ideal for altitudes not exceeding 1000 meters;

Capable of withstanding ambient temperatures with a maximum of +40°C and a minimum of -30°C;

Engineered to endure outdoor wind speeds not surpassing 35 meters/second;

Built to withstand seismic intensities not exceeding 8 degrees; installations must be in areas free from frequent severe vibrations.

The location for installation must be devoid of gases, chemical deposits, salt mist, excessive dust, dirt, or any other explosive or corrosive substances that could severely impact the switch's insulation and conductivity.

Note:

WHEN CONDITIONS EXCEED THE NORMAL USE PARAMETERS, USERS ARE ENCOURAGED TO NEGOTIATE WITH THE COMPANY FOR TAILORED SOLUTIONS.

 

Installation, Use and Adjustment

Pre-installation Preparations

1. Thoroughly remove any dust and dirt from all parts and meticulously clean the surface of the insulating porcelain bottle to ensure optimal performance.
2. Diligently scrub the wiring surface of the ground screw to maintain effective conductivity.
3. Apply a generous layer of industrial Vaseline to any rotating parts and contact areas to ensure smooth operation and prevent wear.
4. Inspect the contact surface and adjust the compression spring height to ensure the contact pressure complies with standards as outlined in Table II.
5. This switch is specifically designed for hoist use and is intended for integration with the transformer on transmission lines.
6. With a rated current of 200-400 amperes, it typically requires three mounting holes for installation. For 600-1000A, three mounting holes are also used.

Annual Maintenance: Ensure the following components of the switch are regularly checked every year:
Diligently remove any accumulated dirt from conductive parts, contact surfaces, and the surface of insulating porcelain bottles to maintain reliability.

Carefully inspect all parts for damage, placing significant emphasis on examining the insulating porcelain bottle for any signs of damage or cracks.

Verify that the contact surface of the conductive part remains in pristine condition to ensure continued operational efficiency.

Detailed Photos

 

 

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications