OEM High Voltage Isolator - Chbeb Model (H) Gwbeb - 45*55*38mm

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

(H)GWBEB type Outdoor High-Voltage Isolation Switch stands as a pinnacle of engineering excellence, meticulously crafted for deployment on 10(12, 15, 24)kV high voltage power transmission and distribution lines. It elegantly facilitates the opening and closing of single-phase or three-phase circuits, ensuring the presence of voltage while devoid of load.

Engineered for single-phase application within three-phase systems, this switch boasts a simplistic yet robust architecture that combines cost-effectiveness with user-friendly operation. It offers a spectrum of rated currents: 200, 400, 600, 800, 1000, and 1250 amps. The switch's anatomy consists of a base, post insulators, conductive parts, and a mechanical assembly. Its innovative gate knife mechanism orchestrates circuit operations, with dual conductive blades per phase, reinforced by external compression springs. Precision in contact pressure is achieved through meticulous spring height adjustment. Operated via an insulated hook stick, this switch also includes a self-locking feature ensuring operational safety.

Working Environment:

Elevation must not surpass 1000 meters.

Ambient temperature parameters: maximum not exceeding +40°C; minimum not dipping below -30°C.

Maximum wind velocity for outdoor settings: 35 meters/second.

Seismic endurance at a maximum of 8 degrees; the installation locale must be free from frequent severe vibrations.

Installation sites must be void of gases, chemical residues, salt mist, dust, or other harmful materials that could compromise the switch's insulation and conductivity.

Note:

SHOULD YOUR REQUIREMENTS EXCEED THESE STANDARD CONDITIONS, WE ENCOURAGE USERS TO DISCUSS CUSTOM SOLUTIONS WITH US.

Installation, Use and Adjustment

Preparation Before Installation

1. Carefully cleanse components of dust and grime, ensuring the insulating porcelain bottle's exterior is immaculate.
2. Thoroughly clean the grounding screw's wiring surface.
3. Apply a protective layer of industrial Vaseline to all rotating components and contact zones.
4. Inspect the contact area, adjusting the compression spring's height to achieve the contact pressure specifications outlined in Table II.
5. Exclusively designed for hoisting uses, this switch is intended for use alongside transformers in line applications.
6. Accommodates rated currents of 200-400 ampere hours, typically utilizing three mounting apertures. For 600-1000A capacities, three mounting apertures are used.

Annual Inspection Checklist:
Clean accumulated dirt from conductive parts, contact areas, and insulating porcelain bottle surfaces.

Meticulously inspect all components for damage, paying particular attention to insulating porcelain bottles for any signs of cracks or damage.

Ensure the integrity of the conductive part's contact surface.

Detailed Photos

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications