China Chbeb Outdoor Isolation Switch High Voltage Load Break Disconnector

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

The (H)GWBEB type outdoor high-voltage isolation switch, also revered as an isolation disconnect switch, is meticulously engineered for deployment on 10(12, 15, 24)kV high voltage power transmission and distribution lines. It is crafted to seamlessly open and close single-phase or three-phase circuits, managing the transition gracefully without load, yet with the voltage present.

Our switch is meticulously designed for single-phase utilization in three-phase line systems and is synonymous with a simple structure, cost-efficiency, and user-friendliness. It is available in a range of rated currents: 200, 400, 600, 800, 1000, and 1250 amps. The switch features a robust construction comprising a base, post insulators, conductive components, and a mechanical section. The innovative gate knife structure facilitates circuit opening and closing, with each phase's gate knife featuring two conductive blades, enhanced with external compression springs on either side. By adjusting the spring height, the contact pressure required for the switch's gate knife is meticulously achieved. Operations are conducted using an insulated hook stick for both opening and closing actions, complimented by a self-locking device to ensure safety and reliability.

Working Environment:

Altitude must not exceed 1000 meters for optimal performance;

The ambient temperature should ideally be no higher than +40°C and not drop below -30°C for efficient operation;

Outdoor conditions should ideally have a wind speed not surpassing 35 meters per second;

The seismic intensity should be a maximum of 8 degrees; the installation location should be free from frequent and severe vibrations to maintain stability.

The installation site must remain free from gases, chemical deposits, salt mist, dust, dirt, or any other explosive or corrosive elements that could severely impact the switch's insulation and conductivity.

Note:

WHEN NORMAL CONDITIONS ARE EXCEEDED, USERS CAN CONSULT WITH THE COMPANY TO DISCUSS ALTERNATIVES AND SOLUTIONS.

 

Installation, Use and Adjustment

Pre-installation work

1. Ensure to remove all dust and dirt from components, and delicately clean the surface of the insulating porcelain bottle to maintain optimal performance.
2. Thoroughly scrub the wiring surface of the ground screw to ensure a reliable connection.
3. Lightly coat the rotating parts and critical contact areas with industrial Vaseline for smooth operation.
4. Inspect the contact surface, and adjust the compression spring height to maintain contact pressure as outlined in Table II.
5. This switch is exclusively designed for hoisting use and should be employed alongside transformers on the line for optimal integration.
6. The switch's rated current is 200-400 ampere hours, typically utilizing three mounting holes, while 600-1000A configurations also use three mounting holes.

Annually inspect the following switch components to ensure continued reliability:
Efficiently remove all dirt from the conductive parts, contact surfaces, and the insulating porcelain bottle surfaces.

Carefully examine all components for damage, with particular attention to the insulating porcelain bottle for any signs of damage or cracks.

Consistently verify that the conductive part's contact surface remains intact and in excellent condition.

Detailed Photos

 

 

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications