Outdoor AC Disconnector with Medium Voltage Isolation Capabilities

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

The (H)GWBEB type Outdoor High-Voltage Isolation Switch, also known as an Isolation Disconnect Switch, is expertly engineered for deployment on 10(12, 15, 24)kV high voltage power transmission and distribution systems. It is designed to seamlessly open and close single-phase or three-phase circuits while maintaining voltage presence, but without load. This robust switch embodies reliability and precision in high-voltage management.

Specifically crafted for single-phase applications within three-phase line systems, this switch is lauded for its straightforward design, economic efficiency, and user-friendly operation. Available in a range of rated currents—200, 400, 600, 800, 1000, and 1250 amps—these switches are composed of a sturdy base, durable post insulators, conductive components, and a mechanical section. The circuit is made or broken using a gate knife structure, where each phase's gate knife boasts dual conductive blades supported by external compression springs. By adjusting the spring height, the necessary contact pressure for optimal switch performance is achieved. Operating this switch involves the use of an insulated hook stick for safe and efficient opening and closing maneuvers, bolstered by a self-locking device for enhanced security.

Working Environment:

Designed for altitudes not exceeding 1000 meters;

It withstands ambient temperature conditions, with a maximum limit of +40°C and a minimum of -30°C;

Resilient against outdoor wind speeds up to 35 meters/second;

Built to endure seismic activity up to 8 degrees, with installation sites requiring minimal exposure to frequent severe vibrations.

The installation environment must be free from gases, chemical deposits, salt mist, dust, or dirt, as well as other explosive or corrosive mediums that could severely compromise the switch's insulation and conductivity.

Note:

WHEN NORMAL USE CONDITIONS ARE EXCEEDED, USERS ARE ENCOURAGED TO ENGAGE IN NEGOTIATION WITH THE COMPANY FOR CUSTOM SOLUTIONS.

Installation, Use and Adjustment

Pre-installation Work

1. Ensure all components are free of dust and dirt, and meticulously clean the surface of the insulating porcelain bottle for optimal performance.
2. Thoroughly scrub the wiring surface of the ground screw to ensure a clean connection.
3. Apply a protective layer of industrial Vaseline to all rotating parts and contact areas to ensure smooth operation.
4. Inspect the contact surface and adjust the compression spring height to meet the specified contact pressure requirements detailed in Table II.
5. This switch is meticulously designed for hoisting purposes and is ideally utilized in conjunction with transformers along the line.
6. The switch's rated current spans from 200 to 400 ampere hours typically, necessitating just three mounting holes. For 600-1000A applications, three mounting holes suffice for secure installation.

Conduct an Annual Inspection on the Following Switch Components:
Routinely remove any accumulated dirt from conductive parts, contact surfaces, and the insulating porcelain bottles' exterior to maintain integrity.

Examine all parts for potential damage, giving special attention to the insulating porcelain bottle to detect any damage or cracks that might compromise usability.

Ensure the conductive part's contact surface remains in excellent condition for optimal performance.

Detailed Photos

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications