Customizable Medium Voltage Load Break Isolator 45*55*38mm China

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter

Product Description

Product Description

(H)GWBEB Type Outdoor High-Voltage Isolation Switch, also revered as the Isolation Disconnect Switch, is meticulously engineered for optimal performance on 10(12, 15, 24)kV high voltage power transmission and distribution lines. It seamlessly opens and closes single-phase or three-phase circuits, ensuring operational efficiency when voltage is present, but under no-load conditions.

Crafted with precision for single-phase functionalities within three-phase line systems, this switch stands out for its straightforward design, affordability, and user-friendly attributes. Available in various rated current options—200, 400, 600, 800, 1000, and 1250 amps—it comprises a robust base, reliable post insulators, conductive parts, and a mechanical section. The innovative gate knife structure facilitates seamless circuit operations. Each phase's gate knife integrates two conductive blades, complemented by external compression springs on either side. Fine-tuning the spring height ensures optimal contact pressure, enhancing performance. An insulated hook stick governs the opening and closing actions, while a self-locking mechanism ensures secure operations.

Working Environment:

Altitude must not exceed 1000 meters;

Ambient temperature range: maximum not surpassing +40°C; minimum not dropping below -30°C;

Outdoor wind velocity should not exceed 35 meters/second;

Seismic intensity should be within 8 degrees; the installation location must remain free from frequent severe vibrations.

Installation sites must be free from gases, chemical deposits, salt mist, dust, dirt, or any other explosive or corrosive elements that could significantly impair the switch's insulation and conductivity.

Note:

IF NORMAL USE CONDITIONS ARE EXCEEDED, USERS ARE ENCOURAGED TO CONSULT WITH THE COMPANY FOR CUSTOMIZED SOLUTIONS.

Installation, Use and Adjustment

Pre-installation work

1. Ensure thorough cleaning by removing dust and dirt from all parts, with particular attention to the insulating porcelain bottle surfaces.
2. Carefully scrub and clean the wiring surfaces of the ground screw to maintain optimal conductivity.
3. Apply a protective layer of industrial Vaseline to all rotating parts and contact areas to enhance durability and performance.
4. Examine the contact surfaces and adjust the compression spring height to align with specifications in Table II, ensuring ideal contact pressure.
5. Designed exclusively for hoisting applications, this switch harmonizes perfectly with transformers on the line.
6. The switch's rated current spectrum ranges from 200 to 400 ampere hours, with three mounting holes typically utilized. For 600-1000A, three mounting holes are employed.

Conduct an annual assessment to inspect the following switch components:
Meticulously remove dirt from conductive parts, contact surfaces, and insulating porcelain bottle surfaces to ensure optimal functionality.

Inspect all components for potential damage, with a focused examination for any damage or cracks in the insulating porcelain bottle.

Ensure superior contact quality by verifying the condition of the conductive parts' contact surfaces.

Detailed Photos

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications