Custom Outdoor High Voltage Load Break Disconnector for Reliable Power Control

• Customization: Available
• Type: 10kv/12kv/15kv
• Structure: According to Customer Requirements
• Model NO.: (H)GWBEB
• Installation: Outdoor High-voltage
• Operation: Manual/Electric/Pneumatic/Hydraulic
• Grounding Mode: According to Customer Requirements
• Movement Mode: According to Customer Requirements
• Number of Poles: According to Customer Requirements
• Grounding: According to Customer Requirements
• Series: Two
• Run: According to Customer Requirements
• Switching Mode: According to Customer Requirements
• Common Model: Gw9
• Structure of Operating: According to Customer Requirements
• Certification: ISO, RoHS, CE
• Brand: Chbeb
• Customizable: OEM/According to Customer Requirements
• Transport Package: Standard Shipping Packing
• Specification: 45*55*38mm
• Trademark: CHBEB
• Origin: China
• HS Code: 853530900
• Production Capacity: 5000 PCS/Quarter
• Package Size: 45.00cm * 55.00cm * 38.00cm
• Package Gross Weight: 20.000kg

Product Description

Product Description

(H)GWBEB type outdoor high-voltage isolation switch, renowned as an isolation disconnect switch, is meticulously engineered for integration with 10(12, 15, 24)kV high voltage power transmission and distribution lines. It functions seamlessly to open and close single-phase or three-phase circuits while maintaining voltage presence, yet without load.

This switch, crafted for single-phase operation within three-phase line systems, stands out for its straightforward design, affordability, and user-friendly nature. The switch offers rated currents of 200, 400, 600, 800, 1000, and 1250 amps, comprising a base, post insulators, conductive elements, and a mechanical section. Its innovative gate knife structure facilitates the circuit's opening and closing actions. Each gate knife phase includes dual conductive blades, flanked by external compression springs for optimized contact pressure. An insulated hook stick ensures smooth operation, while a self-locking device enhances security.

Working Environment:

Suitable for altitudes not exceeding 1000 meters;

Ambient temperature range: maximum of +40°C and minimum of -30°C;

Able to endure outdoor wind speeds up to 35 meters/second;

Designed to withstand seismic intensities not exceeding 8 degrees; installation sites should be free from frequent severe vibrations.

The installation area must not contain gases, chemical deposits, salt mist, dust, dirt, or other explosive or corrosive substances that could compromise the switch's insulation and conductivity.

Note:

WHEN THESE STANDARD CONDITIONS OF USE ARE SURPASSED, CUSTOMERS ARE ENCOURAGED TO ENGAGE IN NEGOTIATION WITH OUR COMPANY.

 

Installation, Use and Adjustment

Pre-installation work

1. Cleanse all parts of dust and dirt meticulously, ensuring the insulating porcelain bottle's surface is thoroughly wiped.
2. Scrubbing the wiring surface of the ground screw is essential.
3. Apply a protective layer of industrial Vaseline to all rotating parts and contact zones.
4. Inspect contact surfaces, adjusting the compression spring's height to ensure contact pressure aligns with specifications in Table II.
5. This switch is specifically designed for hoisting applications and is intended to be used in conjunction with transformers on the line.
6. Rated for 200-400 amp hours, this switch typically requires three mounting holes, while 600-1000A uses the same three holes.

Annually perform a thorough check on the following switch components:
Meticulously remove dirt from all conductive parts, contact surfaces, and the insulating porcelain bottle's exterior.

Inspect every part for potential damage, with particular attention to the insulating porcelain bottle for any cracks or damage.

Ensure the contact surfaces of conductive components remain in excellent condition.

Detailed Photos

 

 

Product Parameters

The main technical parameters								Table I
Model	Rated voltage kV		Rated current A	kA			10 seconds thermal stable current kA
				peak		Valid values
(H)GW	10 12 15		200	5		9	5
			400	21		15	10
			600	35		25	14
			630	35		25	14
			800	35		25	14
			1000	50		35	20
Contact force parameters									Table II
Model		Rated current(A)			contact pressure(kgf)
(H)GW		5			9
		21			15
		35			25
		35			25
		35			25
		50			35

Certifications